Avdragare, Utdragare

Straight or curved spring steel arms. With the guide cone forcing the arms together - harder, the tighter the screw is tightened.

Drop-forged from steel. The arms are slideable on the yoke and can be reversed for inside or outside gripping. The claws on the arms are long and have a large installation surface, which excludes damage to the workpieces.
No. 5 has adjustable arms for gripping depths up to 700 mm. For other types, in addition to standard arms, extra long and adjustable (Jb) arms can also be obtained.

Drop-forged from steel. The arms are slideable on the yoke and can be reversed for inside or outside gripping. Quick locking of the arms against the yoke with lock nut. The claws on the arms are long and have a large contact surface, which excludes damage to the workpiece.

Cable lug puller. Used for quick disassembly of pole shoes, small ball bearings, gears, etc. Very suitable for battery service and repairs of small electric motors. Through the patented construction, the arms are automatically pressed firmly around the part to be pulled off, and cannot slide off.
No 43-12. Equal 43-2 but three-armed.

With curved arms. Through the patented construction, the arms are automatically pressed firmly around the part to be removed and cannot slide off.

Powerful puller, flexible model, can be used as either a 2-arm or 3-arm puller with a simple hand grip. The arms can also be used for internal or external extraction. The arms lock under spring loading. Available in two sizes 4"-100 mm and 7"-178 mm.

Mechanical nut splitter for easy splitting of hard rusted nuts (splits up to quality class 6) without damaging bolt or thread.

Not conical - same dimension on the bracket as on the tool itself. After a hole has been drilled in the remaining screw end, the screw extractor is turned in. The flanges are then pressed into the sides of the drill hole and the screw can be turned out on its own threads. The threads of the screw hole remain completely undamaged. For the smaller dimensions, there are special centering sleeves for the drilling torque.
- A hole is drilled in the interrupted screw.
- The hole is drilled to the correct dimension.
- The screwdriver is driven into the hole. The hexagon nut is put on. The screw can then be unscrewed on its threads.
- If the screw does not reach the edge of the material, the centering sleeve was used.

Complete set in plastic case. Includes Ridgid No. 1, 2, 3, 4, 5 screw extractors, for screws 1/4"-9/16", matching drills and centering sleeves.

Screwdriver set in 6 parts. For efficient extraction of screws with damaged heads. For screws M4-M24. With square bracket. Supplied in plastic case.
Contents:
No. 1 - For screw M4 (drill diameter 1.8-2.0 mm)
No. 2 - For screw M6-M7 (drill diameter 3 .0-3.5 mm)
No. 3 - For screw M8-M10 (drill diameter 4.0-5.0 mm)
No. 4 - For screw M12-M14 (drill diameter 6.0-7.0 mm)
No. 5 - For screw M14-M18 (drill diameter 8.0-9.0 mm)
No. 6 - For screw M18-M24 (drill diameter 12.0 mm)