Skyddsutrustning

Safety glasses with polycarbonate lens with UV filter (UV380), clear lens (1F) and gray lens (2-1.2). Temples with rubber details and rubber nose bridge. Scratch-resistant lens, anti-fog treated.

Approved/Certified according to:
EN 166:2001
EN 167:2001
EN 168:2001
EN 170: 2002 (grey lens only)

Protective helmet designed especially for professional work and rescue. Well ventilated with 10 air intakes, equipped with aluminum mesh that protects against intrusion of debris. Four-point chin strap keeps the helmet securely in place in the event of a fall. Easy access dial for size adjustment at the back. Holder for headlamp and visor. Reflexes. Equipped with a red colored ring on one of the straps for attaching to a harness. An adapter is required for the installation of hearing protection (not included). The helmet is tested for impacts from the front, back and sides according to EN 12492.
Size: 51-63 cm.
Weight: 390 g.

Approved/Certified according to:
EN 397:2012+A1:2012 (industrial helmet standard)
EN 397 -30°C
EN 397 LD
EN 397 MM

(HTML text not available)

Half mask in Premium Pack. With excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Made of silicone. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask frame are FDA and BGA approved for food, which minimizes the risk of contact allergies. The mask's easily adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. The mask is used as filter protection in combination with filters from Sundström's filter range or in combination with compressed air additive SR 307, which then forms a breathing apparatus with continuous flow for connection to compressed air.
Contents: Half mask (size M/L ), 1 pc particle filter SR 510 P3 R, 1 pc gas filter SR 217 A1, 5 pc pre-filter, pre-filter holder, cleaning tissue, ID label, user manual and storage box.
Use temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 180 g

Approved/Certified according to:
EN 140:1998

Hygiene kit that fits 3M Peltor earmuffs. Contains 2 sealing rings and 2 damping foam. Old, stiff or worn sealing rings impair the cushioning ability of the earmuffs. The noise leaks in, so regularly replace the sealing rings to maintain the cover's performance and increase its lifespan.

Offers effective protection against noise during an entire working day. It is also suitable as disposable protection for people such as visiting a factory. The earplug itself consists of soft, absorbent foam plastic. It sits comfortably in the ear canal and provides effective protection. The brace is placed comfortably under the chin or behind the neck. The plugs are replaceable. Attenuation value SNR 24 dB.
Conforms to EN 352-2.

(HTML text not available)

Adapter for earmuffs for Kask Plasma helmets.

Intended for helmet mounting. Level-dependent hearing protection that listens to the surroundings. The cover has a built-in enhanced FM/AM radio receiver. Audio input allows connection to communication radio. The short, flexible antenna provides reception even in difficult conditions. The radio's sound level is adapted not to exceed 82 dB(A). If the reception signal becomes too weak, the electronics automatically switch to mono without interruption in listening. Bar in stainless steel with stepless height adjustment. Attenuation value SNR 30 dB.
Supplied with 2 AA batteries and 1 cable FL6CE for connection of mobile phone, MP3 player etc. and helmet mount. Protective helmet not included.
Complies with EN 352-1.

Level-dependent hearing protection that listens to the surroundings. The cover has a built-in enhanced FM/AM radio receiver. Audio input allows connection to communication radio. The short, flexible antenna provides reception even in difficult conditions. The radio's sound level is adapted not to exceed 82 dB(A). If the reception signal becomes too weak, the electronics automatically switch to mono without interruption in listening. Bar in stainless steel with stepless height adjustment. Attenuation value SNR 30 dB.
Supplied with 2 AA batteries and 1 cable FL6CE for connection of mobile phone, MP3 player etc.
Conforms to EN 352-1.

Safety glasses with scratch-resistant polycarbonate lenses that absorb 99.9% of UVA and UVB rays. Semi-soft nose bridge and soft shell ends that provide extra comfort and fit. The temples are adjustable in angle for extra good adaptation of the lens to the face.

Approved/Certified according to:
EN 166:2001

Safety glasses in a modern design with streamlined temples. Self-adjusting that provides a secure and comfortable fit. Soft adjustable nose bridge. Polycarbonate glass that absorbs 99.9% UVA and UVB radiation. Double injection molded and soft temples for increased comfort over the ears.

Approved/Certified according to:
EN 166:2001

Ear cover for mounting on a safety helmet. Equipped with noise-reduced microphone, Bluetooth technology and microphones for listening function. Bluetooth version 4.2, for connection to an external device for hands-free calls and streaming. Battery life of up to 78 hours. Push To Listen function, the volume of the Bluetooth-connected device is reduced and the possibility of hearing ambient sounds is increased. Large buttons and voice-controlled menus for easy handling. Easy connection to phone. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Exchangeable covers in different colors are available as accessories. Attenuation value SNR 30 dB. Supplied with 2 x 1.5 V AA batteries, can also be used with rechargeable batteries.
Conforms to EN 352-3:2002

Ear cover for mounting on a safety helmet. Equipped with noise-reduced microphone, Bluetooth MultiPoint technology, FM radio and listening. Bluetooth MultiPoint to be able to connect one or two devices. Bluetooth version 4.2. High noise reduction. Battery life of up to 78 hours. Push To Listen function for easy start of the listening function. Easy connection to phone. Compatible with the 3M Connected Equipment App application, which makes it possible to navigate through the app in the headset's menu and make all configurations in an easy and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Attenuation value SNR 30 dB. Comes with extra pink cover, extra hygiene kit, microphone protection tape and 2 x 1.5 V AA batteries. Safety helmet not included.
Complies with EN 352-3:2002, EN 352-4:2001/A1:2005, EN 352-6:2002, EN 352-8:2008.

(HTML text not available)

Earmuff with headband. Equipped with noise-reduced microphone, Bluetooth technology and microphones for listening function. Bluetooth version 4.2, for connection to an external device for hands-free calls and streaming. Battery life of up to 78 hours. Push To Listen function, the volume of the Bluetooth-connected device is reduced and the possibility of hearing ambient sounds is increased. Large buttons and voice-controlled menus for easy handling. Easy connection to phone. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Exchangeable covers in different colors are available as accessories. Attenuation value SNR 30 dB. Supplied with 2 x 1.5 V AA batteries, can also be used with rechargeable batteries.
Conforms to EN 352-1:2002

Earmuff with headband. Equipped with noise-reduced microphone, Bluetooth MultiPoint technology, FM radio and listening. Bluetooth MultiPoint to be able to connect one or two devices. Bluetooth version 4.2. High noise reduction. Battery life of up to 78 hours. Push To Listen function for easy start of the listening function. Easy connection to phone. Compatible with the 3M Connected Equipment App application, which makes it possible to navigate through the app in the headset's menu and make all configurations in an easy and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Attenuation value SNR 30 dB. Supplied with extra pink cover, extra hygiene kit, microphone protective tape and 2 x 1.5 V AA batteries.
Complies with EN 352-1:2002, EN 352-3:2002, EN 352-4:2001/ A1:2005, EN 352-6:2002, EN 352-8:2008.

Earmuff with headband that can be connected to up to two devices, for example a mobile phone and a communication radio, via Bluetooth MultiPoint Technology. Connects to iOS and Android devices via the 3M Connected Equipment app available on the App Store and Google Play, making it easier to set up and adjust the headset. Voice-guided menu system with frequency announcement, digital station search and the option to save your favorite stations. Also equipped with noise-reducing boom microphone, level-dependent function for ambient noise, push-to-listen function and built-in FM radio. Battery life approx. 58 h (FM radio with listening) and approx. 78 h (streaming via Bluetooth with listening). Automatically shuts off after four hours of inactivity and has a low battery warning indicator. Interchangeable hygiene kits. Attenuation value SNR 30 dB. Supplied with 2 rechargeable Ni-MH AA batteries, USB charger FR09, USB adapter FR08, 2 pink extra shells for the ear cups, 1 hygiene kit HY82 and user manual.
EN 352-1:2002, EN 352-4:2001/A1:2005, EN 352-6:2002, EN 352-8:2008.

Earmuff with headband and rechargeable Li-Ion battery that is charged via solar cells. Solar cell film from PowerFoyle, integrated in the headband, converts both artificial light and natural sunlight into pure electrical energy. Bluetooth technology for connecting to two external Bluetooth devices, via Bluetooth MultiPoint Technology, which enables hands-free calls and streaming. Level-dependent listening function makes it possible to hear ambient sounds and increases situational awareness. Noise-reducing boom microphone, provides clear voice transmission in noisy environments. WAP (Work Audio Profiles) offers a new way to adjust audio settings to suit the work environment to promote situational awareness in different conditions. Supports OTA (Over-the-air) firmware updates to extend product life. The push-to-list (press-to-listen function), hear sounds in the environment better with a simple push of a button. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Also equipped with multifunction button (choose from predefined functions). Battery life of up to 78 hours. The earcup can also be charged with a USB-C cable. The headset automatically turns off after four hours of inactivity to save battery. Interchangeable hygiene kits and covers. Attenuation value SNR 31.5 dB. 
Conforms to EN 352-1:2020

Gas filter, combi filter and particle filter intended for use together with Sundström fan units.
See product sheet for detailed information on each filter.

Gas filters, combi filters and particle filters intended for use together with Sundström's half and full masks.
See product sheet for detailed information on each filter.

Battery-powered fan unit that, together with filters and an approved facepiece, is part of Sundström's fan-assisted breathing protection system. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding contaminants. Powered by the included 14.4 V Li-Ion battery, which provides an operating time of up to 7 h. Charging time approx. 2 h. Equipped with two filters/filter combinations. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with vibrations and sound/light signals in case of obstructions in the air flow. Automatic control of air flow with compensation for air pressure and temperature. The enclosure protection of the electronics is approved according to IP67. The fan unit can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, screen SR 570, welding visor SR 570/SR 574 half mask SR 900, full mask SR 200, welding visor SR 592, helmet with visor SR 580 and welding visor/helmet with visor SR 584/SR 580.
Contents: Fan SR 500, 1 standard battery 14.4 V Li-Ion 2.25 Ah, battery charger SR 513, belt SR 508, 2 pcs particle filter P3R SR 510, 2 pcs filter adapters SR 511, 2 pcs pre-filter SR 221, 2 pcs pre-filter holder SR 512, flow meter SR 356, cleaning napkin SR 5226, 3 pcs plugs for fan and user manual.
Air flow: 175 l/min
Using temperature: -10°C - +55°C
Assigned protection factor: 200 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Assigned protection factor: 1000 (TM3) together with SR 200, 900
Nominal protection factor: 500 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Nominal protection factor: 2000 (TM3) together with SR 200, 900
Weight: 1650 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 12942:1998 + A2:2008

Half mask with excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Made of silicone. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask frame are FDA and BGA approved for food, which minimizes the risk of contact allergies. The mask's easily adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. The mask is used as filter protection in combination with filters from Sundström's filter range or in combination with compressed air additive SR 307, which then constitutes a breathing apparatus with continuous flow for connection to compressed air.
Contents: Half mask, pre-filter holder, cleaning napkin, ID label, pre-filter, storage bag and user manual.
Operating temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 180 g

Approved/Certified according to:
EN 140:1998

Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor in scratch-resistant polycarbonate that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. The exhalation valves' valve caps with shields effectively protect valves and diaphragms against dust and dye. The design and placement of the exhalation valves improve the possibilities of communication. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable elastic band stand is attached to the visor frame and to the exhalation valves, which together with a large head net contributes to a comfortable and safe fit.
The mask is used either as filter protection in combination with filters from Sundström's filter range or as breathing apparatus with continuous flow together with compressed air additive SR 307 .
The mask completed with hose SR 550 (PU) or SR 551 (rubber), it can also be used as a facepiece together with Sundström's fan SR 500 or SR 700.
Together with fan SR 500 EX, it is approved for use in explosive atmosphere.
Contents: Full mask, filter adapter, pre-filter, pre-filter holder, cleaning wipe, ID label and user manual.
Use temperature: -10°C - +55 °C
Assigned protection factor: 500 (P3), 500 (GasX)
Nominal protection factor: 1000 (P3), 2000 (GasX), 1000 (GasX P3)
Weight: 450 g

Approved/Certified according to:
EN 136:1998 class 3
EN 166:2001
EN 12942:1998 class TM3 (combined with fan SR 500/SR 700)
EN 14594:2005 (combined with compressed air additive SR 307)
EN 12942:1998 class TM3, ATEX 2014/34/EU ( combined with fan SR 500 EX)

Made of a soft energy-absorbing polymer foam. With its special closed cell structure, the plug expands slowly and thereby fills the individual ear canal. The result is a hearing plug that effectively blocks out harmful and disturbing noise. Packed in pairs. Attenuation value SNR 31 dB.
Conforms to EN 352-2.

Maintenance-free filtering half mask against dust and other particles. Three-panel folding design with tabs for easy opening and placement. Soft nose foam material and inner protection. Built-in aluminum nose bridge for personal adjustment. With Cool Flow comfort valve that releases very warm air to reduce heat build-up and the risk of fogging on the glasses. Advanced Electret Filter Media (AEM) provides low initial breathing resistance. Does not contain natural rubber latex or PVC. Compatible with eye protection from 3M. Separately packed. Color coded for easy identification.
Conforms to EN 149:2001 and A1:2009.

Kompakt visir i polykarbonat anpassat för Kask Plasma hjälmar. Repskydd på utsidan och anti-imma på insidan. Tillverkad med en rundad kant och "no-drip" gummikant för extra säkerhet. Färg: klart. CE, Cat II, Info, EN166 Class 1 F, EN170.

Compact visor in polycarbonate adapted for Kask Plasma helmets. Scratch protection on the outside and anti-fog on the inside. Made with a rounded edge and "no-drip" rubber edge for added safety. Screw set included. 3 year warranty - up to 10 years of life from the date of production. Weight 70 g

Approved/Certified according to:
EN 166:2001
EN 172:2001 (smoke and silver only)

Helmet cover adapted for medium to high noise. Provides very good attenuation of high-frequency noise. With yellow marking. Adapted for Kask safety helmets. Attenuation value SNR 29 dB.
Conforms to CE Cat II, EN352-3

Beskrivning De gula SC2 hörselkåpor är lämpliga för miljöer med medium till hög ljudnivå (dB). Det bästa valet i högfrekventa ljudsituationer. Lämplig för en mängd olika användningsområden som byggnad och konstruktion, skogsbruk, industriområden, produktionsområden, jordbruk etc. Passar på de flesta hjälmar på marknaden med universella fästen Hörselkåporna kan placeras i tre lägen: Användning, Standby för att tillåta hörsel och Bort när den inte behövs. Smal design ökar stabiliteten och minskar risken för att fastna i begränsade utrymmen. Smidig teleskopisk enkelpunktsstorleksjustering ökar komfort, stabilitet och slitstid. Mjuka och breda öronkuddar har snap-in-system för enkel ersättning Icke ledande Certifierad för användning med Kask-hjälm. Adapter bajonet WAC00003 krävs för montering, medföljer ej. Överensstämmer med EN 352-3:2002 Dämpningsvärden: H = 31 M = 27 L = 19 SNR = 29

Safety glasses with polycarbonate lens with UV filter (UV380), clear lens 2C-1.2 1F. Integrated temple with rubber details and rubber nose bridge, nylon strap included. Anti-fog and scratch-resistant lens. Rubber seal around the lens for better protection.

Approved/Certified according to:
EN 166:2001
EN 167:2001
EN 168:2001
EN 170:2002

Safety glasses with scratch-resistant lens and UV filter (UV380). Polycarbonate temples.

Approved/Certified according to:
EN 166:2001
EN 167:2001
EN 168:2001 

Wind protection for speech microphone. Fits 3M Peltor WS Alert XP and 3M Peltor WS Workstyle.

Face shield designed and developed based on market requirements and needs. Adapted for use together with fan unit SR 500, SR 500 EX or SR 700. It can also be used together with compressed air attachment SR 507. Robust screen with fold-up visor that gives the user comfortable and safe breathing and eye protection. Protects the breathing zone and the head. Impact- and scratch-resistant PC sight glass. Adjustable head position. Air deflector for optimal comfort. Supplied air keeps the visor fog-free. Replaceable flexible breathing tube. Standard attachment for earmuffs. Exchangeable protective foils are available as accessories. PC visor and visor frame withstand high speed particles 120 m/s at extreme temperatures, liquid splash and molten metal splash. Equipped with exhalation valve. Made of materials that allow use in harsh environments.
Contents: Face shield, breathing tube, protective film with clips, cleaning cloth and user manual.
Use temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Weight: 860 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005
EN 166

Skyddsfolie för att skydda siktskiva.

Worker SRL paket lämpar sig främst för arbete inom bygg och industri. Paketet innehåller en Worker Base+ sele, ett 15 meters fallskyddsblock samt en sling. Fallskyddsblocket är certifierad för både horisontellt och vertikalt arbete, till exempel arbete i stege och på tak. För bygg och industri. 15 meters fallskyddsblock.

Fläkt SC-modellen är intelligent och lättanvänd, och erbjuder ett antal avancerade utökningar av det ursprungliga Proflowkonceptet. Automatisk luftflödesreglering säkerställer enhetlig och balanserad tillförsel av andningsluft under hela arbetspasset, och en mikroprocessorbaserad dataloggningsfunktion sörjer för tillförlitligt underhåll.

Helmask FM3 i halo-butyl gumm t/Spirit, (Small) Sidomonterad slang förbättrar komforten och balansen. Helmasken är även godkänd att användas med Pro2000-filter, ett antal visir i olika material, ytbehandlingar och färg. Levereras utan slang som beställs separat.

Hörselkåpa med hjässbygel som kan anslutas till upp till två enheter, till exempel en mobiltelefon och en kommunikationsradio, via Bluetooth MultiPoint Technology. Kopplas till iOS- och Android-enheter via 3M Connected Equipment-appen som är tillgänglig på App Store och Google Play, och som gör det enklare att ställa in och justera headsetet. Röstguidat menysystem med frekvensannonsering, digital stationssökning och möjlighet att spara sina favoritstationer. Även utrustad med bullerreducerande bommikrofon, nivåberoende funktion för omgivningsljud, push-to-listen-funktion och inbyggd FM-radio. Batteritid ca 58 h (FM-radio med medhörning) och ca 78 h (strömmning via Bluetooth med medhörning). Stängs av automatiskt efter fyra timmars inaktivitet och har en varningsindikator för låg batterinivå. Utbytbara hygiensatser.

Gummislang i EPDM-gummi, för användning tillsammans med Scott-maskerna FM1, FM2, FM3, FM4