Lås, Beslag, Inredning

Brass screw for knob, cylinder rings and the pressures with thread M5.

The cylinder screw is intended for oval cylinders type 701. The length depends on whether you need a cylinder extender or not. Without cylinder extender, 28 mm length fits.
Material: Galvanized steel.
Thread: M5.

Type 565T is now only used for toilet accessories type 265. Others are used together with cylinder knob type 560.

Cylinder extender for round cylinder.

Accessory to cover the door's cylinder recess where the cylinder is not to be mounted or where there is to be a cylinder without a knob. Screw included.
Diameter: Ø 52 mm.
Material: Brass.

Locking spray/lubricant which significantly increases the cylinder's functional reliability and service life. Ready to use after light shaking. The plastic tube is inserted into the keyhole, after which the spray button is pressed for approx. 1 second. Insert the key and turn it a few times. Wipe the key. Clean first with ASSA Lock Cleaner in case of ice formation/dirt. Effective - small amounts give quick results. Quick drying - does not bind dust and dirt. Water resistant - does not bind salt, protects against rust. May not be used for retainer locks. Extremely flammable.

Door closers for exterior doors and fire doors. Closing force, closing speed and strike can be set. Fits both right- and left-hung doors. Normal assembly and upside-down assembly. The closing force is continuously adjustable. Can be obtained with delayed closing. Max door width 1400 mm. Opening brake (adjustable) protects against damage from careless opening of the door. TS83 Size EN 3 - 6.
Approved according to EN 1154.

Brass cylinder knob. Supplied with 90 mm turn screw for through attachment, 28 mm cylinder screw and 83 mm cylinder turn pin with washer. Fits door thickness 38-70 mm.

Door pressure for outer and inner door. With bow.
Grip length: 107 mm
Projection: 55 mm
Material: Brass

Ställbart excenterlås i förzinkat stål. Hål för skruv = 5,5mm.

AD-lås av stål. Höger- eller vänstermodell. Levereras komplett med nyckel, nyckelbussning och slutbleck. Max 80 mm dörrtjocklek.

Hook that is easily mounted under a wire shelf or wire shelf basket. Supplied in 3-pack.
Size (LxWxH): 80x23x30 mm.

For TS 73, TS 73 EMF, TS 7400 and TS 83. For frame depth 70 - 135 mm.

1 liter dispenser for foam hand disinfection.

1 liter dispenser for after-work cream.

Divider for mesh back 185. Simply clicks into place in a 185 mm deep mesh back to divide it into different areas. 2-pack.

Divider for mesh back 85. Simply clicks into place in an 85 mm deep mesh back to divide it into different areas. 2-pack.

Shaft extension is used to extend the distance between the automatic and where the arm is to be attached to the door leaf. The extension enables mounting of the automatic where there is not enough space to attach. When using standard arm 04, max. axle extender 48 mm can be used.

Back stop that prevents the wire back from sliding out too far and falling out of the back stand. Clicks into place around the gable side rail and wire back. We recommend two stops per hill, one on each side.

Bathtub handle made of stainless steel. Pipe 25 mm. Wall distance 85 mm.

Brass bathtub handle. Pipe 25 mm. Wall distance 85 mm.

Bathroom mirror made of float glass. Supplied with mirror clamps.

Rear edge fitting for protection of the hinge side of the door.
1210: Consists of an end plate that is mounted in the frame and a plate with two claws that is mounted in the door. The slanted screws help to provide a breaking strength of over 700 kp. Supplied with screw.
Note! Not approved by SSF.
1220: Consists of an end plate that is mounted in the frame and a plate with two hardened pins that is mounted in the door. The six screws provide a breaking strength of over 700 kg. Delivered incl. screw. Approved by SSF for protection of the hinge side of the door.

Brass tailgate for letter throwing. Suitable for letter boxes 12 and 203.
Suitable screw: TKS 3.0 brass or nickel-plated brass.

Brass tailgate for letter throwing. Fits letter throwers 648 and 649.

Balkonghängare av stål. Nedfällbar modell.

Barnsäkring hakdel + stopp. Vit.

Complete set of accessories.
Function: The hook bar is locked out and in with a key or knob. If the button on the lock post is pressed down, the turning function is blocked so that the lock cannot be opened without a key. When unlocking with a key, the knob function is automatically engaged. It is important that the knob is not blocked if someone is at home and it needs to be evacuated. The d12 cylinders have a security level that exceeds previous models and the keys are tied to a certificate of ownership and are legally protected against illegal copying.
Contents: Cylinder d1212 with 5 keys. Cylinder accessories 3212. Handle 1956 era. Dial plate 4356. 2 extension parts. Drill for crank pin.

Galvanized. Screws included.

Galv. Too swipe. Hole diameter 6.5 mm. SB-packaged.

ASSA Blind cylinder. Outside. FN = Nickel plated

Used when the lock case is not used in a milled door leaf.

Plastic letters, signs and numbers with lugs for attachment to grooved panel. Height 13 mm.

Bookend with clamp. Made of white lacquered sheet steel. Max thickness of shelf 20 mm. 2-pack for left and right mounting

100 - Aluminum box lock. Piston diameter 15 mm and stroke 28 mm. End plate of steel.
300 - Box lock of steel including end plate. Piston diameter 10 mm and stroke 17 mm.

Boxlås av aluminium. Bitskyddat. Kolvdiameter 15 mm.

Brandkårshänglås rödlackerat låshus av stål. Korrosionsskyddad stålbygel. Utan nyckel.

Fire key cabinet made of 1 mm sheet steel. Painted red. With glass pane. 1 hook.

Letter case with black panel for plastic letters or holder for text tape. For all door thicknesses.
Materials: Nickel-plated brass.

Letter box made of sheet metal with black panel for letters. With fire hydrant and tailgate. Nickel plated.

Brass letter thrower without tailgate. Tailgate 12 is used for 647. Tailgate 16 is used for 648 and 649.

I huvudsak till inåtgående fönster. Symmetriska och justerbara. Längd: 25 mm.
Borrhål: Ø 4,9 - 5,0 mm.

Ytbehandling: Förzinkad

Forged stirrup. Stainless, acid resistant. SB-packaged.

Support strip that is screwed into the wall and supports Elfa's top-hung click-in system. Countersunk screw holes. Locks the suspension rail vertically and laterally. Available in different widths and can be cut to the desired width. Can be combined with a cover strip (not included) for a nicer finish.

Boat ring with machine thread and nut.
Dimensions: Thread dimension x Screw length x Eye diameter.
Supplied in SB packaging

The dimension: Thread dimension x Screw length x Loop diameter.

Wooden threaded boat ring. Stainless, acid resistant. SB packed.
Dimensions: Thread dimension x Screw length x Eye diameter.

Container lock that fits standard transport and storage containers. Provides reliable protection against illegal intrusions with extra securing of the doors, the container's weakest point. Made of extremely durable steel. Built-in monoblock and 10/30 half-cylinder of Europa profile. All parts are corrosion protected. Can be assembled and disassembled easily without leaving traces on the object. No tools needed. Delivered with 3 keys incl. security card. Weight 8.5 kg.
Meets class 5 requirements according to SSF 1051 (Swedish Theft Protection Association).

Made of strong and resistant specially hardened steel. Treated to resist corrosion. Fits the vast majority of container models and can also be used on sliding, hangar and machine hall doors, cargo doors on transport vehicles, etc. ATTENTION! To be used together with the lock 37/70 which is included in the packaging, otherwise not approved.
Granite lock with lock body and shackle made of hardened special steel. Abus Plus dish cylinder with more than 250,000 different locks, drill-proof cylinder opening and double ball lock. The jumper is removable with an inside measurement of 100 mm. The lock is adapted for the ConLock 215/100 container lock and only approved in class 4 in this combination. Complete for assembly.

2256 = Accessories for cylinder on the inside of the door and cover plate for the outside
2356 = Accessories for cylinder on the outside of the door and cover plate for the inside.
Door thickness must be stated.

Cylinder sleeve with cylinder ring for mounting on round double cylinder type ASSA 712 etc. Screw, cylinder extender and cylinder plug are purchased separately.

Cylinder accessories for narrow profile lock Classic, for internal and external locking where requirements for approved locking are not met

Cylinder plates, knob plates, cover plates and other details for the Assa S4 Evolution narrow profile lock.

Cylinder spacer made of white plastic. Crescent shaped. Intended for cylinder in the Vinga series.

Area of ??use: Lock housing for entrance doors whose construction consists of narrow frame profiles, equipped with pull handles and door closers alt. door automation, in shops, department stores, offices, apartment buildings, etc.
Features: With cylinder and locking case. Automatic locking of cylinder drop. Can be combined with electric end plates.
Function: Cylinder case retracts with key or knob. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. Not set up.

Area of ??use: Lock housing for escape doors in offices, hotels, hospitals, etc. whose construction consists of narrow frame profiles.
Properties: With cylinder and locking case. Automatic locking of cylinder drop. Available with built-in microswitches. Can be combined with built-in electric end plate.
Function: The cylinder cases are retracted with a key or escape accessories. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case.

Area of ??use: Lock housing for entrance doors whose construction consists of narrow frame profiles, equipped with pull handles and door closers alt. door automation, in shops, department stores, offices, apartment buildings, etc.
Properties: With cylinder case. Stackable cylinder case. Can be combined with electric end plates.
Function: Cylinder case retracts with key or knob. Lacks locking function. The cylinder cases are set up with a set-up key.

Area of ??use: Lock housing for entrance doors whose construction consists of narrow frame profiles, equipped with pull handles and door closers alt. door automation, in shops, department stores, offices, apartment buildings, etc.
Features: With cylinder and locking case. Automatic locking of cylinder drop. Stackable cylinder case. Can be combined with electric end plates.
Function: Cylinder case retracts with key or knob. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. The cylinder cases are set up with a set-up key.

Area of ??use: Lock housing for entrance doors and gates in the replacement market (ROT) where modular locks cannot replace.
Properties: With cylinder and locking case. Automatic locking of cylinder drop. Stackable cylinder case. Can be combined with electric end plates. Mortise lock for special recess dimension.
Function: Cylinder case retracts with key or knob. The cylinder cases are set up with a set-up key. Lacks locking function.

Area of ??use: Lock housings for entrance doors and gates fitted with pull handles, door closers or automatic doors.
Features: With cylinder and locking case. Automatic locking of cylinder drop. Available with built-in microswitch. Stackable cylinder case. Reversible drops for alternative door hanging. Available with 70 mm mandrel depth. Can be combined with electric end plates.
Function: Cylinder and locking cases retract with key or knob. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. The setup mechanism is located in the post with the following functions: The cylinder cases are set up with a setup key.
5584 With a setup button.
5585 With a locking key.

Lock housing for surface mounting. With automatic cylinder drop locking. The case can be set up by pushing it into the lock housing. Released via knob or key. The cylinder case is reversible.
Colour: Black.

Area of ??use: Lock housing for entrance doors and gates in the replacement market (ROT) where modular locks cannot replace.
Properties: With cylinder and locking case. Automatic locking of cylinder drop. Stackable cylinder case. Can be combined with electric end plates. Mortise lock for special recess dimension.
Function: Cylinder case retracts with key or knob. The cylinder cases are set up with a set-up key. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case.

Area of ??use: Lock housings for entrance doors and gates equipped with pull handles, door closers etc. door automation.
Properties: Mandrel depth version 35, 50, 70 mm. With cylinder and locking case. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. Available with built-in microswitch. Stackable cylinder case. Reversible cylinder cases for alternative door hanging. Can be combined with electric end plates.
Function: Cylinder and locking cases retract with key or knob. The cylinder cases are set up with a set-up key.

Area of ??use: Lock housings for entrance doors and gates equipped with pull handles, door closers etc. door automation.
Properties: Mandrel depth versions 35, 50, 70 mm. With cylinder and locking case. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. Available with built-in microswitch. Stackable cylinder case. Reversible cylinder cases for alternative door hanging. Can be combined with electric end plates.
Function: Cylinder and locking cases retract with key or knob. The cylinder cases cannot be set up.

Used for oval cylinder type 701 for door thicknesses where the cylinder must be extended.

Cylinderförlängare, rund. 10 mm.

For surface-mounted locks and cabinet locks. 507 for 25 mm cylinder. 707 for 30 mm cylinder.

Cylinder sleeve for round lock cylinder.

Cylinder ring "Rococo". Used on the inside when installing the inner cylinder. The cylinder rings are available in different heights and are adapted to the door's C dimensions.
Material: Brass.

Cylinder ring for use with round cylinder and cylinder sleeve.

Cylinder rings for oval cylinders type 701. The dimension (height) is adapted to the B dimension of the door.
Material: Brass.

Brass cylinder ring. New model covering three previous sizes.

Cylinder rings for oval cylinders type 701. The dimension (height) is adapted to the B dimension of the door.
Addion is a bacteria-inhibiting surface treatment and suitable for hospital environments and the like.

Cylinder ring for oval cylinder three different flexible heights: 6-11 mm, 11-16 mm and 16-21 mm. For mounting together with oval cylinder. Height of cylinder rings and length of screw is chosen depending on door thickness.
Material: Brass.

Cylinder ring outside. For doors with oval cylinder and lock housing type module, compact or interior door lock. For fitting around oval lock cylinder. Used together with knob or inner cylinder ring.
Material: Brass.

Cylinder ring of brushed stainless steel. C/c 30 mm.

Cylinder ring of brushed stainless steel. Used when installation of the cylinder is desired on both the inside and outside.

Cylinder ring (9 mm) and extension ring (7 mm) made of brass in the same package.
Only the cylinder ring is fitted when the lock cylinder protrudes 6-11 mm from the door leaf.
Cylinder ring + extension ring is fitted when the lock cylinder protrudes 12-18 mm from the door leaf.
For longer protrusions, the assembly is completed with an extension ring Universal Extra.
Material: Brass.
*= Made of stainless steel.

Cylinder ring outside (9 mm) and extension ring (7 mm). Only the cylinder ring is fitted when the lock cylinder protrudes 6-11 mm from the door leaf. Cylinder ring + extension ring is fitted when the lock cylinder protrudes 12-18 mm from the door leaf. For longer protrusions, cylinder ring Extra is also fitted. To be completed with inner cylinder ring Universal and pressure screws M5.
Material: Aluminium.

Cylinderskydd för oval cylinder. Ger ett gediget klimatskydd i klass IP68. Skyddar effektivt mot vägsalt, damm, fukt och frysning i utmanande miljöer. Skyddet monteras enkelt som en cylinderring och har ett flexibelt mått tack vare de medföljande distansringarna. Väderskyddet levereras med svart gummitätning som standard. 
Material: Innerdel av mässing, yttre ring av rostfritt stål 
Diameter: 69 mm 
Djup: 44 mm (inkl väderskydd)

Cylinderskydd för rund cylinder. Ger ett gediget klimatskydd i klass IP68. Skyddar effektivt mot vägsalt, damm, fukt och frysning i utmanande miljöer. Innerdelen monteras fast på cylindern varvid själva cylinderringen gängas fast, dras tät mot dörrblad och sätter innerdelen något i spänn. Väderskyddet levereras med svart gummitätning som standard. 
Material: Innerdel av mässing, yttre ring av rostfritt stål 
Diameter: 79 mm 
Djup: 42 mm (inkl väderskydd)

Narrow profile accessories Classic. To be completed with other signs and screws.

Narrow profile accessories Classic. To be completed with other signs and screws.

Narrow profile accessories Classic. To be completed with other signs and screws.

Narrow profile accessories Classic. To be completed with other signs and screws.

For narrow profile lock.
Material: Brass.

Brass knob, used on the inside of modular locks 560, 565 etc.

Knob used on the inside of modular locks 560, 565 etc.
Addion is a bacteria-inhibiting surface treatment and suitable for hospital environments and the like.

For disabled people. Cannot be mounted on regulation locks with 360° key rotation.

Knob used on the inside of modular locks 560, 565 etc.
Prion is a nickel-free surface treatment adapted for people with contact allergies.

Knob for doors with modular, compact or interior door locks. For operation of rule and cases. Used together with lock housing, lock cylinder and cylinder accessories.

Supplied with knob screw, cylinder screw and driver without cylinder ring. Door thickness up to 85 mm.

Aluminum cylinder knob. Supplied with 2 pcs M5x90 mm pressure screws for continuous attachment. 2 x cylinder screws 28 mm and 1 x 63 mm driver with washer. For door thickness 38-80 mm.
Material: Aluminum 

Spacer ring for alternative door thicknesses fits cylinder sleeve 507/707.

Pull handle with oak grip. Chrome mount. C/C measurement 285 mm.

To make it easier for people in wheelchairs to close doors. Mounted under the pressure rosette at the lock and with a screw at the hinge side. Does not affect the function of the lock. Delivered in parts, which allows adaptation to right- or left-hung doors. The tube can be cut for narrower doors.

Pull handle FIX 34 is intended for the outside of a window door. Especially suitable when handle lock FIX 850 or handle FIX 837S is mounted on the inside and you want to avoid locking out. The washer has the same dimensions and hole spacing as the FIX espagnolette handle.
Material: Acetal plastic

Pull handle of matte brushed black plastic with aluminum fasteners. Can be paired with pressure plate 1431. Handle diameter 40 mm. Supplied with M8 bolt and socket nut for through mounting. Maximum door thickness when installed in pairs 60 mm. C/C measurement 105 mm.

Pull handle of matte brushed black plastic with aluminum fasteners. Supplied with M6 bolt and socket nut for through mounting. Handle diameter 40 mm. Maximum door thickness when installed in pairs 60 mm. C/C measurement 332 mm.

Aluminum pull handle.

Pull handle with curved shape, intended for double assembly. Made of polished stainless steel tube Ø 32 mm. Concealed attachment (c/c 400 mm). Supplied in pairs and with screw for door thickness 38-78 mm.

Area of ??use: Lock housing for entrance doors in shops, offices, apartment buildings, etc. whose construction consists of narrow frame profiles.
Properties: With cylinder, locking and pressure drop. Automatic locking of cylinder drop. Stackable cylinder case. Can be combined with electric end plates.
Function: Cylinder and pressure drops are retracted with a key or knob. The pressure cases are retracted with pressure. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. The cylinder cases can be set up with a set-up key.

Area of ??use: Lock housing for external and internal doors, entrance doors, technical spaces, etc.
Properties: With cylinder, locking and pressure drop. Automatic locking of cylinder drop. Available with built-in microswitch. Reversible drops for alternative door hanging. Steel pressure drops for fire-rated doors. Available with 70 mm mandrel depth. Can be combined with electric end plates.
Function: Cylinder, locking and pressure drops are retracted with a key or knob. The pressure cases are retracted with pressure. Automatic locking of the cylinder case when 14 mm is unlocked and the locking case is pressed in.
The cylinder case cannot be set up.

Area of ??use: Lock housing for external and internal doors, entrance doors, technical spaces, etc.
Properties: With cylinder, locking and pressure drop. Automatic locking of cylinder drop.
Can be obtained with built-in microswitch. Stackable cylinder case. Reversible drops for alternative door hanging. Steel pressure drops for fire-rated doors. Available with 70 mm mandrel depth. Can be combined with electric end plates.
Function: Cylinder, locking and pressure drops are retracted with a key or knob. The pressure cases are retracted with pressure. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. The set-up mechanism is located in the post with the following functions:
The cylinder cases are set up with the set-up button.

Area of ??use: Lock housing for external and internal doors, entrance doors, technical spaces, etc.
Properties: With cylinder, locking and pressure drop. Automatic locking of cylinder drop. Available with built-in microswitch. Stackable cylinder case. Reversible drops for alternative door hanging. Steel pressure drops for fire-rated doors. Available with 70 mm mandrel depth. Can be combined with electric end plates.
Function: Cylinder, locking and pressure drops are retracted with a key or knob. The pressure cases are retracted with pressure. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. The setup mechanism is located in the post with the following functions. The cylinder cases are set up with a set-up key.

Lock housing with interlocked cylinder case and pressure case. Possibility of re-occupancy via external pressure in combination with electric end plate which is connected to unlocked position via fire/evacuation alarm. Pressure drop provides fire containment. No arrangement of cylinder cases. Can be combined with electric closing plate Assa Standard, e.g. 575. Possibility of authorized key passage via cylinder. Intended for accessories 179 A. Mandrel depth 50mm. Reversible.

Area of ??use: Lock housing for external and internal doors, entrance doors, technical spaces etc.
Properties: Mandrel depth versions 35, 50, 70 mm. With cylinder interlock and pressure drop. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. Available with built-in microswitch. Stackable cylinder case. Reversible drops for alternative door hanging. Steel pressure drops for fire-rated doors. Can be combined with electric end plates.
Function: Cylinder locking and pressure drops are retracted with a key or knob. The pressure cases are retracted with pressure. The cylinder cases are set up with the set-up button.

Area of ??use: Lock housing for external and internal doors, entrance doors, technical spaces, etc.
Properties: Mandrel depth versions 35 and 50 mm. With cylinder interlock and pressure drop. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. Available with built-in microswitch. Stackable cylinder case. Reversible drops for alternative door hanging. Steel pressure drops for fire-rated doors. Can be combined with electric end plates.
Function: Cylinder locking and pressure drops are retracted with a key or knob. The pressure cases are retracted with pressure. The cylinder cases are set up with the set-up button.

Area of ??use: Lock housing for external and internal doors, entrance doors, technical spaces, etc.
Properties: Mandrel depth version 50 mm. With cylinder interlock and pressure drop. Automatic locking of the cylinder cases at 14 mm unlocking and depressed locking case. Available with built-in microswitch. Reversible drops for alternative door hanging. Steel pressure drops for fire-rated doors. Can be combined with electric end plates.
Function: Cylinder locking and pressure drops are retracted with a key or knob. The pressure cases are retracted with pressure. The cylinder case cannot be set up.

Reinforced steel double bracket for Habo Shelving system. Maximum load 120 kg.

Monochrome shower curtain that fits in all types of bathrooms and protects the interior from water splashes. With weights that hold the drape down. Complete with drapery rings. Supplied in a cloth bag.
Materials: 100% polyester.

Extra rings for the Erica shower curtain rod made of plastic (so-called meeting rings).

Plastic draperies. Fits all drapery rods. Easy to assemble. Fits all drapery rods. 12-pack.

Duschdraperiring av plast. Till stängerna 7000, 7010 samt 7020.

Angled draperies for shower curtains. With two roof brackets for extra stability. Supplied with drapery hooks and two ceiling brackets with 600mm long braces. Easy to assemble. Rail and brace are easily cut to the desired length with a hacksaw.

Angled draperies for shower curtains. With a roof bracket for extra stability. Supplied with drapery hooks and a ceiling mount with 600mm long brace. Easy to assemble. Rail and brace are easily cut to the desired length with a hacksaw.

Duschdraperistång av aluminium med justerbar längd.

Aluminum shower surround with silicone strip seals against the floor. The skirting is placed loosely on the floor and is easy to clean. The silicone strip is replaceable for increased service life.

Door brake that is suitable for outward opening side-hung windows, skylights and bottom/top-hung windows as well as outward-opening doors with up to approx. 1200 mm door leaf width. The braking effect is adjusted quickly and easily with a tension nut. Recommended window width max 1200 mm for tilt and turn windows. Max opening angle of 135° at max 860 mm. For frame widths from at least 38 mm. Minimum required installation space 630 mm. Length 530-880 mm. Supplied with screws with matching cover caps.

Friction washer made of acetal plastic. Other parts of galvanized steel.
Used for storage door, garbage room door, cellar door, etc.
Fix 328: For outward opening door. Mounted on the stop side.
Fix 328 A: For inward opening door. Mounted on the hinge side.
Holds the door with friction in the desired opening position. The braking force can be varied with the adjustment nut. The arm can be detached from the frame mount on Fix 328, or from the door mount on Fix 328 A. Fits both right- and left-hung doors. Length folded 265 mm.

Holds the door with friction in the desired opening position. Prevents the door from blowing again, and reduces the risk of crushing injuries. The braking power can be varied.
Materials: Frame bracket and door bracket made of lacquered steel. Telescopic tube of lacquered steel with joint head of acetal plastic. Friction adjustment of acetal plastic. Different versions depending on whether the door is outward or inward opening and door width (frame opening). Fits both right- and left-hung doors.

Door brake for outward opening door. Lacquered steel brackets and telescopic tube. Stainless steel rod with joint head and plastic adjusting sleeve.

Dörrförstärkningsbehör till extralås för dörrar där krav på godkänd låsenhet ställs. Förbandet håller om och förstärker dörrbladet vid låsenheten så att brythållfastheten ökas. Monteras med 6 st genomgående skruv och tillhörande nipplar. Uppfyller fodringar enligt Svensk Standard 3559, klass 4. 
Material: Stål 
Bredd: 66 mm 
Höjd: 170 mm 
Tjocklek (insida/utsida): 4 mm / 4 mm

Dörrförstärkningsbehör till extralås för dörrar där krav på godkänd låsenhet ställs. Förbandet håller om och förstärker dörrbladet vid låsenheten så att brythållfastheten ökas. Monteras med 6 st genomgående skruv och tillhörande nipplar. Uppfyller fodringar enligt Svensk Standard 3559, klass 4. 
Material: Stål 
Bredd: 66 mm 
Höjd: 227 mm 
Tjocklek (insida/utsida): 3 mm / 4 mm

In the open position, the door bracket is pressed firmly into the holder, so that the door remains in place. When you pull the door, the holder releases the door bracket.

The advantage of the door holder is that it is possible to set the door in the desired position. In addition, the risk of the door slamming shut and e.g. squeezes the child's fingers. It is easy to use, works great for ventilation and does not damage the door.

Metal door holder.

Stainless steel door holder with hidden fastening of the floor part with screw pins. For wooden or stone floors. Including screw.

Metal door holder.

Steel door holder. Foldable with rubber stop.

Steel safety chain. For inward and outward opening doors.

Mechanical bell made of nickel-plated brass.

Used for doors and hatches instead of door handles.
Knob: Ø 50 mm
Material: Brass

For doors and hatches etc. Fixed mounting.
Fixing plate: Ø 52 mm
Knob: Ø 50 mm
Material: Brass

Avsedda för 2-flygliga brand- och rökavskiljande dörrar. Passar för både höger- och vänsterdörrar, och garanterar att dörrarna stängs i rätt ordning.Monteras i dörröverstycket eller bakom dörrkarmen. Passar såväl breda som smala dörrar. Med fjädrande buffert och ställskruvar för inställning av stödarm och med inställbar excentriskt lagrad utlösningsrulle vid val av storlek.

Door coordinator for double doors. Mounted on frame top piece. Adjustable. Fits both right- and left-hung doors. Cannot be folded up against a wall.

Plug-in doorbell suitable for entrances at home, in businesses or as a reception bell. Plugs into a wall outlet and has a range of up to 100 meters. Choose between 11 ringtones and 5 volume levels, including silent mode. The push button is modular, which enables a combination of several push buttons and receivers. Can be expanded with up to 20 push buttons per unit. Switchable light indicator. 
The push button is powered by 1 pc battery CR2032 (included), with a battery capacity of 20000 presses. The push button is IP55 rated (water and dust protected), with an operating temperature of -30°C to +55°C. 
The doorbell is plugged into a 220-240 V wall outlet. Operating temperature 0°C to +40°C.

Wireless, portable doorbell with push button. Up to 150 m wireless range. Digitally enhanced sound. A maximum of 2 accessories can be connected. Maximum volume of 80 dB, heard at up to 60 m distance, not adjustable volume. Four different melodies to choose from. Mounting brackets are included. Battery for the push button is included, batteries for the doorbell (4 pcs LR6 AA) are not included.

Door lock for outward-facing entrance doors. Easy to mount and enables you to open your door in locked position.

Intended for outward-opening doors and provides the possibility to open the door in locked position. Installed with wood screw and through-hole screw through the door for maximum security. Screw included.

Steel door pin. Mounted on the hinge side of the door to prevent the door from being lifted off the hinges in the event of a burglary attempt.

Door stop made of partially recycled elastic plastic. Protects the door and wall from impacts and damage. Mounting with Torx screw. Screw not included.

Stainless steel door stop with 30 mm gray rubber buffer.

Dørstopper av gummi.

Door stop of gray lacquered steel with 30 mm gray natural rubber buffer.

Steel door stop with plastic stop. For wall mounting.

Door closers for external, internal and fire doors. Supplied complete with door closer housing, standard arm L190 and mounting plate A120. Adjustable closing force, closing speed, impact effect and opening brake. Suitable for left- and right-hung doors. Concealed mounting plate. Max door width 1400 mm. Adjustable shaft 14 mm in height. Adjustable spring force EN 3-6.
Approved according to EN1154. Type approved for fire doors.
Dimensions door closer housing (LxWxH): 260x47x60 mm.

Door closer complete with standard arm alt. setup arm. Only for light doors with door width max 1100 mm and weight 40-60 kg. Adjustable closing force, closing speed and strike. For door leaf assembly on the hinge side. Can be mounted on a frame.
TS68 Size EN 2-4.

Door closers for indoor doors, also fire doors. Closing force, closing speed and strike can be set. Suitable for both right- and left-hung doors. Normal assembly and upside-down assembly. Opening brake adjustable with valve. The closing speed is continuously adjustable with valves. Switch-on function steplessly adjustable with the arm angle. Closing force size EN 2- 4 for door width max 1100 mm.
Approved according to EN 1154.

A combination of door closer and mounting device made of magnet built into the door closer housing. Operating voltage 24V DC.
Mounting Hinge side (standard) / Stop side (frame mounting)

Sliding door closer that fits almost all doors. Can be fitted with sliding rails for many different needs. Suitable for both right- and left-hung doors. Closing force, closing speed and strike can be set. In addition, you can set a time delay for the closing. Falling opening resistance makes the TS 93 particularly suitable for children and the disabled. Adjustable opening brake. Assembly Hinge side (standard) / Stop side (frame assembly).
Size EN 2-5.

TS 4000, one of GEZE's standard models, is adapted for fire, exterior and interior doors, where high demands are placed on functionality and strength. All adjustment of functions is done from the front with thermostable safety screws that have a stop in the open position to avoid oil leakage. The size and power are adjusted from the front and can be easily read on the optical size indicator. These features enable quick & simple assembly. The TS 4000 meets all the standards and requirements that the market places on a door closer.

Door closer with adjustable closing speed and strike. Fits doors with door width 820-1100 mm and weight up to 85 kg. For door leaf assembly on the hinge side or frame assembly on the stop side. Should be mounted on the inside when mounting on an external door. Closing strength 4 (EN1154). Fire rated according to EN1154.
Contents: Door closer, standard arm, screws and installation instructions.

Model 1200: Can be mounted horizontally or vertically.
Intended to be combined with catch hook 801, 804, 806.
Can also be combined with fixing plate 802 when mounted at an angle.
Not type approved for fire doors.
Model 1500: For doors in schools, hospitals, hotels, offices and public buildings.
Type approved for fire doors TG 0104/00. Replaces lock with drop piston in fire cell delimiting door up to EI30.
(Fire cell delimiting door in escape route must be supplemented with fabric-approved door closer)
Intended for assembly with catch hook 801, 804 and 806. Can be mounted horizontally alt. vertically. Holding force 60 N.
Gives a soft and efficient closing of the door. Adjustable closing speed with valve screw.
Model 3000: Intended for installation in e.g. elevator doors.
Not adjustable closing speed. Catch hook cannot be used together with 3000.
The corresponding "catch curve" is manufactured and built into the door frame by the door manufacturer.

Door pressure for outer and inner door. Pusher with return spring that assists the rowing spring of the lock. Different rosettes depending on the lock housing.
Rosette Ø: 52 mm
Grip length: 111 mm
Protrusion: 69 mm< BR>Material: Brass

Door pressure for front door. With bow and return spring.
Rosette Ø: 52 mm
Grip length: 121 mm
Protrusion: 60 mm
Material: Brass

Door pressure for outer and inner door. Return spring that relieves the lock housing's rower spring and helps the pressure remain in a horizontal position. Continuous screw fastening reinforces the door. Supplied with bows.
NOTE! Only fits modular locks.
Bowsett Ø: 52 mm
Grip length: 106 mm< BR>Protrusion: 55 mm
Material: Brass

Door pressure for outer and inner door. Return spring that relieves the lock housing's rower spring and helps the pressure remain in a horizontal position. Continuous screw fastening reinforces the door. Supplied with bows.
NOTE! Only fits modular locks.
Bowsett Ø: 52 mm
Grip length: 106 mm< BR>Protrusion: 55 mm
Material: Brass
Addion is a bacteria-inhibiting surface treatment and suitable for hospital environments and the like.

Door pressure for outer and inner door. Return spring that relieves the lock housing's rower spring and helps the pressure remain in a horizontal position. Supplied with rosette, pressure screw in steel and sleeve nut in brass. Passes the test against nickel emission according to SS-EN 12472:2005 (NOTE! Does not apply to variant surface treated with nickel).
Rosset Ø: 52 mm.
Material: Zinc.

Door pressure for outer and inner door. Return spring that relieves the lock housing's rower spring and helps the pressure remain in a horizontal position. Continuous screw fastening reinforces the door. Supplied with bows.
NOTE! Only fits modular locks.
Bowsett Ø: 52 mm
Grip length: 106 mm< BR>Protrusion: 55 mm
Material: Brass
Prion is a nickel-free surface treatment adapted for people with contact allergies.

Door pressure for outer and inner door. Fixed rosettes with through screw fastening strengthen the door.
Rosette Ø: 52 mm
Handle length: 106 mm
Projection: 55 mm
Material: Brass

Door pressure for outer and inner door. Fixed rosettes with through screw fastening strengthen the door.
Rosette Ø: 52 mm
Handle length: 106 mm
Protrusion: 55 mm
Materials: Brass
Prion is a nickel-free surface treatment adapted for people with contact allergies.

Electromechanical code handle for convenient locking/unlocking of the inner door. Available in right and left versions. Fits Scandinavian standard lock housings. The locking mechanism is operated with five buttons. Four buttons to enter a four to six digit code for unlocking and one button for locking. Visual and acoustic feedback. Master code and user code are programmed during installation. "Free swing" from the outside in locked position, always openable with the handle from the inside. The code remains in the event of a power failure/battery change. Powered by 2 pcs CR2, 3V lithium batteries.
Suitable for lock housing Modul, Evo and connect.
Rosette Ø: 54 mm
Grip length: 140 mm
Projection: 68 mm
Materials: Brushed stainless steel and matt chrome-plated zinc.

Electromechanical code handle for convenient locking/unlocking of the inner door. Available in right and left versions. Fits Scandinavian standard lock housings. The locking mechanism is operated with five buttons. Four buttons to enter a four to six digit code for unlocking and one button for locking. Visual and acoustic feedback. Master code and user code are programmed during installation. "Free swing" from the outside in locked position, always openable with the handle from the inside. The code remains in the event of a power failure/battery change. Powered by 2 CR2, 3V lithium batteries. Fits lock housing 2014.
Rosette Ø: 54 mm
Grip length: 140 mm
Protrusion: 68 mm
Materials: Removed stainless steel and matt chrome-plated zinc.

Function: The door hinge has a fixed bow and is attached with hidden through screws. The pressure has a built-in return spring.
NOTE! Only fits modular locks.
Design: Delivered in chrome, matt chrome, polished brass. Supplied with M5 screw and socket nuts. Chrome and matt chrome are classified as nickel protected.
Grip length: 107 mm

Door push for inner door. Supplied without rosettes.
Projection: 55 mm
Grip length: 115 mm
Material: Brass, plastic grip or wood.

Door push for inner door. Supplied without rosettes.
Grip length: 112 mm
Projection: 50 mm
Material: Brass

Door push for inner door. Supplied with rosettes.
Grip length: 115 mm
Projection: 55 mm
Material: Brass, plastic grip or wood.

Door pressure for outer and inner door. Hidden screws on bow and key plates. M4 thread.
Rosette: 52 mm
Protrusion: A13121 = 57 mm, A13122 = 64 mm
Grip length: 130 mm
Grip diameter: A13121 = 16 mm, A13122 = 19 mm
Material: Stainless steel

Door pressure for outer and inner door. Hidden screws on bow and key plates. M4 thread.
Rosette Ø: 52 mm
Protrusion: A13131 = 55 mm, A13132 = 65 mm
Grip length : 128 mm
Grip diameter: A13131 = 16 mm, A13132 = 19 mm
Material: Stainless steel

Door pressure for outer and inner door. With key tag. Concealed screw fastening on bow and key plate. Diameter of handle grip 16 and 19 mm respectively. M4 thread.
Projection: 65 mm
Grip length: 128 mm
Material: Stainless steel

Door pressure for outer and inner door. Hidden screws on bow and key plates. M4 thread.
Rosette Ø: 52 mm
Protrusion: A13162 = 55 mm, A13164 = 65 mm
Grip length: 129 mm
Grip diameter: A13162 = 16 mm, A13164 = 19 mm
Material: Stainless steel

Door pressure for outer and inner door. Hidden screws on bow and key plates. M4 thread.
Rosette Ø: 51 mm
Protrusion: A13181 = 62 mm, A13182 = 68 mm
Grip length: 133 mm
Grip diameter: A13181 = 16 mm, A13182 = 19 mm
Material: Stainless steel

Door pressure for outer and inner door. Concealed screw fastening on bow and key plate. M4 thread. (The package also contains a wood screw).
Rosette Ø: 52 mm
Protrusion: 65 mm
Grip length: 129 mm
Grip diameter: A13187 = 16 mm, A13188 = 19 mm
Material: Brushed stainless steel

Door handle for interior door. Of traditional model that fits mirror doors as well as smooth doors.
Handle length: 110 mm.
Projection: 48 mm.
Material: Zinc/zamak.

Door handle for interior door. Of a traditional model that fits mirror doors as well as smooth doors. Comes with key tags.
Grip length: 110 mm.
Projection: 48 mm.
Material: Zinc/zamak.

Door push for inner door. Supplied with key tag.
Key tag Ø: 50 mm
Projection: 58 mm
Grip length: 120 mm
Materials: Brass with plastic grip

Door pressure for outer and inner door. With bow.
Projection: 55 mm
Grip width: 107 mm
Material: Brass

Door handle for front door with modular lock box. With double-acting return spring.
Projection: 55 mm.
Grip length: 107 mm.
Material: Brass.

Door handle with double-acting return spring, intended for front door. Made of lead and nickel free brass. With an antibacterial surface treatment (Clean).
Grip length: 107 mm
Protrusion: 55 mm
Material: Lead- and nickel-free brass

Door push for inner door. Comes with key tag.
Projection: 68mm
Grip length: 100mm
Material: Brass with black plastic grip .

Door handle for interior door. Without return spring. Made of lead and nickel free brass. With an antibacterial surface treatment (Clean).
Grip length: 107 mm
Protrusion: 55 mm
Material: Lead- and nickel-free brass

Door push for inner door. Supplied with key tag. Also available as front door handle, see A6696.
Projection: 55 mm
Handle length: 107 mm
Material: Zinc/ zamak

Door push for inner door. Suitable for door thickness 38-42 mm.
Protrusion: 50 mm.
Grip length: 113 mm.
Material: Zinc/zamak.

Door push for inner door. Supplied with key tag. Suitable for door thickness 38-42 mm. 
Rosette Ø: 50 mm 
Protrusion: 50 mm. 
Grip length : 113 mm. 
Materials: Zinc/zamak.

Door pressure for front door. With return spring.
Projection: 67 mm
Grip length: 125 mm
Material: Brass

Door pressure for front door. With return spring. For modular lock box.
Projection: 62 mm
Grip length: 120 mm
Material: Brass

Massive and compact door handle with modern design for interior doors.
Projection: 45 mm
Grip length: 110 mm
Material: Zinc

Door push for inner door. Supplied with key tag.
Rosette Ø: 50 mm
Protrusion: 50 mm
Grip length: 110 mm
Materials: Brass

Door pressure for front door. With return spring. For modular lock case.
Projection: 60 mm.
Grip length: 125 mm.
Material: Brass.

Door push for inner door. Comes with key tag.
Projection: 52 mm.
Grip length: 112 mm.
Material: Brass.

Door push for inner door. Supplied with key tag.
Projection: 60 mm.
Grip length: 130 mm.
Material: Zinc/zamak.

Door pressure for front door. With return spring. For modular lock box.
Projection: 60 mm.
Grip length: 125 mm.
Material: Brass

Aluminum door handle with double-acting return spring intended for front door with modular lock box. Classic model with soft shapes. The handle also works with a lock housing where locking takes place by lifting the handle. Also available as an interior door handle.
Projection: 65 mm.
Grip length: 135 mm .
Materials: Aluminum.

Door pressure for front door. Concealed attachment. With return spring. For modular lock chest. Matching cylinder knob 40 DF with hidden attachment.
Projection: 70 mm.
Grip length: 120 mm.
Material: Brass.

Door push for inner door. Supplied with key tag.
Projection: 50 mm
Grip length: 110 mm
Material: Zinc/zamak.

Door push for inner door. Comes with key tag.
Projection: 50 mm
Grip length: 115 mm
Material: Zinc/Zamak

Dörröga av mässing. För 35-57 mm dörrtjocklek. Vidvinkel 200 grader.

The lock is equipped with so-called split spindle (Split Spindle) which enables opening from the inside without a push button.
The lock works simply as a mechanical lock from the inside, while card or other identification is required to open from the outside.

(HTML text not available)

Area of ??use: Standard electric strike plate is suitable for doors with normal security requirements and is suitable as day locking in shell protection and internal locking in commerce, offices and industry or in entrances and public areas in apartment buildings.
Function: Standard electric end plate available in three main types
Multifunction (75, 575)
- 12 - 24 VAC/VDC
- Easily switchable forward/reverse function
Forward function (70, 570). post designed for this purpose
Bronze twist case and zinc alloy lock body
Used in combination with interlocked single or double case locks.
Multifunction (75, 575): Easily switchable forward/reverse function< BR>Compatible with 12 - 24 VAC/VDC
Breaking strength 7 kN (700 Kg)
High impact and shock resistance
Available with micro switch
- Locking piston contact (575)
Right-facing function (70, 570); , 571): Breaking strength 7 kN (700 Kg)
High impact and shock resistance
Available with micro switch
- Locking piston contact (571)
Technical Data, Multi(75,575 ): The multi-end plate has built-in transient protection
Voltage/current, 12 - 24 VAC/VDC ± 10%, 340 mA - 185 mA
Technical data, (70, 570,71, 571) : Electrical termination plate must always be connected to direct voltage.
Protection diode (e.g. 1N4004) must be mounted as close as possible to the coil of the electrical termination plate. This is done to protect control electronics, e.g. code lock or card reader against transients (voltage peaks)
12 VDC ± 10%, 230 mA
24 VDC ± 10%, 140 mA
Micro switch single-pole alternating
Max. 30 VDC, 1 A

(HTML text not available)

The dense tuft of "grass blades" on Astro Turf effectively scrapes off all dirt and mud. It is light and easy to lift away during cleaning, which is most easily done by shaking and rinsing.
Usage: Indoors, outdoors, low traffic.
Materials: Polyethylene .
Thickness: 18 mm.
Washability: Rinse.
Scratch function: Good.
Absorbency: None.

Effective drying mat with very good absorbency. Keeps the room clean and dry and protects the floors against wear. The long pile attracts the moisture and the fine dirt collects at the bottom of the carpet. Can hold up to 6 liters of water per square meter.
Usage: Indoors. Medium traffic.
Materials: Olefin yarn, vinyl backing.
Thickness: 9 mm.
Washability: Rinse.
Scraping function: Low.
Absorption capacity: Very good.

(HTML text not available)

For mounting cylinder rings on double cylinders etc. Makes it difficult for unauthorized persons to dismantle the accessory.
Thread M5. With waist.

One-way screw in chrome for narrow profile accessories type ASSA 4559, 4659 and 4759. M5 thread.

Ställbart excenterlås i förzinkat stål Ledad bygel, M6-gänga

Ställbart, låsbart excenterlås i förzinkat stål.

Ställbart excenterlås i förzinkat stål. Hål för skruv = 7 mm.

Ställbart, låsbart excenterlås i förzinkat stål. Hål för skruv 7mm

Ställbart excenterlås i förzinkat stål.

Steel eccentric lock. Fits lid fitting 4001. Lid fitting is included in SB packaging.

Expander bar for drying elevator Eric. High-strength bar, made of plastic-coated steel tube (Ø 22 mm and Ø 25 mm). The ends against the wall are 70 mm in diameter and lined with foam rubber. Lift block for the drying lift included. When mounting against fragile walls that cannot withstand the expansion pressure, mount with screws etc.

Area of ??use
Electric end plate for day locking in shell protection, entrances, gates and other high-frequency doors. Used in combination with an interlocked cylinder trap lock.
Properties
Breaking strength over 10000N. Engineered to withstand 1,000,000 opening cycles. Manipulation protected with shock/shock protection. Microswitch with a maximum breaking power of 2A. Twist case and lock housing in steel. Standard voltages 12V DC/300mA or 24V DC/160mA. Can be obtained with special coils 8V DC or 48V DC. Used in combination with posts in the 800 series.
Function
Straight-facing function= the swivel is disengaged with tension.
131,331 without locking piston contact.
5131,5331 with locking piston connector.
8131,8331 with locking piston and anchor connector.

Area of ??use: Lock housing for entrance doors in the residential sector in villas, apartments, service buildings, etc.
Properties: Meets requirements according to Swedish Standard SS 3522, class 3. Included in approved by insurance company locking device. With pressure drop and rule. Blocking mechanism (setting button) for turning function in the post. Automatic locking of rule at 21 mm unlocking. Hardened and coercive rule. Reversible pressure drop for alternative door hanging. Pressure drop made of steel for fire-rated doors.
Function: The rule is locked out and in with a key or knob. If the set-up button is pressed down, the knob function is blocked so that the lock cannot be opened without a key = secure. When unlocking with a key, the knob function is automatically switched on = home comfort. The pressure cases are retracted with pressure.

Area of ??use: Lock housing for external and internal doors, office premises, industries etc.
Properties: Meets requirements according to Swedish Standard SS 3522, class 2. With pressure drop and rule. Automatic locking of rule at 21 mm unlocking. Reversible pressure drop for alternative door hanging. Steel pressure drop for fire rated doors.
Available with 70 mm mandrel depth.
Function: The rule is locked out and in with a key or knob. The shutters are pulled in with a pusher, key or knob.

Area of ??use: Lock houses for entrance doors, archives, storerooms, office premises, industries etc.
Properties: Meets requirements according to Swedish Standard SS 3522, class 3. Included in approved by insurance company locking device. With pressure drop and rule. Hardened and coercive rule. Automatic locking of rule at 360° key turn. Available with built-in microswitch. Reversible pressure drop for alternative door hanging. Steel pressure drops for fire-rated doors. Can be obtained with 70 mm mandrel depth.
Function: The rule is locked out and in with a key or knob. The pressure cases are retracted with pressure.

Lock housing for emergency exits, switchgear, transformer installations and the like.
Properties: With cylinder and locking case. Automatic locking of cylinder drop. Available with built-in microswitch. Reversible cylinder case for alternative door hanging. Steel cylinder case for fire rated doors. Available with 70 mm mandrel depth. Can be combined with electric end plates. Meets the requirements for SS-EN 179 in combination with fitting Assa 179-8563.
Function: Cylinder case retracts with key, knob or escape accessories. Automatic locking of cylinder case at 14 mm unlocking and depressed locking case. The cylinder cases cannot be set up.

Stainless steel hinge protection.

Property maintenance ring galvanized and resilient

Surface treatment
Galvanized or nickel-plated steel.
Application area
For single- and double-acting swing doors, for self-closing doors with stops.
Properties
Simple-acting, resilient and load-bearing.

For double-acting swing doors, for swing doors.
Features: Double-acting, resilient and load-bearing. Adjustable spring force, independent of right or left, adjustment of closing force.

Brass flange hook. Dimension refers to projection. Thread length approx. 11 mm.

Foot for back stand. Creates a nicer finish and protects fragile floors.

Foot scraper with brushes. Galvanized steel frame and propene plastic brush. 4 brushes with stiff bristles. Suitable for non-sore shoes with coarse dirt.
Brush height: 57/80 mm.

Fyrkantshylsa av plåt. Används utanpå roddarpinnen i lås med 9 mm fyrkantshål.

For window door with connected arch.
Mounted recessed in the inner arch half as a counter for the inside cylinder.
Material: Steel.

5325 is used for FIX 835S, 836S, 837S when mounting on a coupled frame.
5365 is used for FIX 8350S when mounting on a coupled frame.
Material: Chromed zamak metal. Brass driver.
Required screw included.

Plastic fixing washer with round corners for symmetrical hinges 2465.

Steel washer for symmetrical hinges 2465.

Fixing plate used for mounting lock box to door system SFB 2086.

Fästögla av härdat stål. Godkänt i klass 3 tillsammans med klass 3 hänglås.

Surface treatment:Nickel-plated.
Intended for door closer Assa 1200 (horizontal installation).

Intended for assembly where the door liner is higher than the door leaf.
3 - 18 mm = with plastic spacer
18 - 28 mm = without plastic spacer

Window holder with detachable frame attachment. Used for windows and window doors together with Fix-spanjolet which has transfer. Operated with the handle of the spaniel. With the handle in the closed position, the arc is held with friction in the desired ventilation position. To protect the frame and hinges, the window brake slips when overloaded. With the handle in the open position, the bow has clearance. The holding friction increases with a larger opening angle.
Size 3: Brake box length 352 mm.
Size 4: Brake box length 452 mm.

Window brake for windows and window doors together with Fix espagnolette with transfer.
Operated with the espagnolette handle. With the handle in the closed position, the sash is held in the desired ventilation position, in the open position the window holder has free movement.
Material: Brake runner made of zamak metal. End bearings and frame fasteners made of acetate plastic. Other parts of galvanized steel.

For inward opening windows. Used for side-hung and overhung windows. Frame bracket and arch bracket made of lacquered steel. Stainless steel rod. Acetate plastic friction adjustment. Fits both right- and left-hung windows.